Skip to content
Sprue & Brush
Best Mr. Super Clear substitute

Mr. Super Clear Alternatives

Nothing is wrong with Mr. Super Clear. It is simply a pressurized Japanese import, which is a shipping problem rather than a product problem.

By Brijon M.Last updated
Aerosol cans of clear topcoat on a workbench

The short answer

Testors Dullcote is the closest substitute and the easiest to buy in the US: same lacquer chemistry, same 3 oz can format, very slightly less dead-flat. If you are sealing a whole army, The Army Painter's 400 ml matt varnish is far better value per model, and if you cannot use an aerosol at all, a brush-on acrylic matte varnish cannot frost.

The quick version

#ProductBest forScorePrice
1
An aerosol can of flat lacquer coat
Testors DullcoteA long-standing lacquer flat coat, widely stocked in the US. Slightly less dead-flat than Mr. Super Clear and considerably easier to buy locally.
Closest substitute overall8.5Check price on Amazon
2
A large aerosol can of matt varnish for miniatures
The Army Painter Anti-Shine Matt Varnish (400 ml)A 400 ml matt varnish aimed squarely at wargamers rather than scale modelers. Four times the can of a US hobby aerosol, which is the point when there are sixty models to seal.
Best for sealing a whole army8.5Check price on Amazon
3
A bottle of brush-on acrylic varnish
Brush-on acrylic matte varnishWater-based varnish you brush or airbrush on. Slower and less even than a rattle can, and it works in a flat in winter, which the rattle can does not.
Best if you cannot use an aerosol8.2Check price on Amazon
4
An aerosol can of water-based clear topcoat
Mr. Hobby Mr. Premium Top Coat (B-601 / B-602 / B-603)The water-based aerosol in the same family, sold in gloss, semi-gloss and flat. Much less aggressive than Mr. Super Clear, which is exactly what a first topcoat over hand-brushed acrylics should be.
Same family, gentler chemistry8.6Check price on Amazon
5
An aerosol can of flat clear lacquer
Tamiya TS-80 Flat ClearTamiya's flat clear in the familiar 100 ml TS can. Chemically matched to the rest of the TS range, so it is the safe flat coat if the kit underneath was sprayed with Tamiya cans.
Best over a Tamiya-painted model8.4Check price on Amazon
6
An aerosol can of matte clear topcoat
Mr. Hobby Mr. Super Clear MattThe lacquer topcoat the hobby standardized on. Dead flat, tough, and the thing that turns shiny bare plastic into something that looks painted.
The original, for reference9.1Check price on Amazon

Scores are our own editorial read against the criteria stated below — not a lab measurement and not a user rating. Tap a row for the full write-up.

What Mr. Super Clear is known for

Start here, because this page is not an argument against the product. Mr. Super Clear is the lacquer topcoat the modeling hobby standardized on, and it earned that position. Its flat version lays down the deadest finish of anything in this category — genuinely flat, not low-sheen — and it dries to a hard shell that locks decals and panel lining under a layer which survives handling. On bare injection plastic it is the thing that turns a toy-looking kit into something that reads as painted.

It is our top pick in the matte topcoat roundup and it stays our top pick. If you can buy it conveniently, buy it.

Why people look for an alternative anyway

Three reasons, none of which is about the finish.

Aerosol shipping. This is the big one. Pressurized cans cannot travel by standard post or air mail, so they ship as restricted goods by ground freight, often with a surcharge that costs more than the can. A product made in Japan and sold mainly through specialist importers inherits that problem twice over. Plenty of US retailers simply do not list it, and the ones that do run out.

Fumes. It is a strong lacquer. It wants real ventilation and a respirator, not a cracked window, and for someone painting in a bedroom or a shared flat that is a genuine blocker rather than an inconvenience. If this is your situation, the spray booth roundup and the respirator roundup cover what it would take to use it safely, and the brush-on option below covers how to avoid the question entirely.

Frosting risk. Shared with every lacquer flat coat, and unforgiving: spray above roughly 65% relative humidity and the coat blooms chalky white across a finished model. Some people want a product that fails less expensively.

So the question this page answers is not “what is better”. It is “what do I use when I cannot get it, cannot ventilate for it, or do not want to risk it”.

What we judged the substitutes on

  • Flatness. How close to dead flat it dries. This is the property people are trying to replace, so it leads.
  • US availability. Whether you can get it without an import wait or a hazmat surcharge. For this page specifically it carries as much weight as finish.
  • Forgiveness. How badly it punishes humidity, a heavy coat or an impatient schedule.
  • Value. Cost per model sealed, which is a different question from cost per can — a 400 ml can and a 3 oz can are not in the same bracket.

Scores are our own editorial read against those criteria, not measurements. Can sizes, product codes and the makers’ own handling warnings come from manufacturer pages and live retailer listings, cited at the bottom.

The closest match

Testors Dullcote is the substitute to reach for first, and the reason is that it is the same kind of product: a lacquer flat coat in a 3 oz aerosol, long-established, and stocked in most US hobby shops so there is no import wait at all.

Be straight about the difference, because there is one: it is not quite as dead flat. On dark colors a faint sheen remains where Mr. Super Clear leaves none. On a tabletop army nobody will ever notice; on a display piece photographed under lights, you might. It frosts in humidity exactly the same way, because the chemistry is the same — swapping brands does not buy you out of that risk.

It has one quiet advantage worth knowing: its gloss sibling, Glosscote, is the same can in the same shops, so the gloss-then-flat sequence is two cans from one brand with no compatibility question. We cover the gloss half in the gloss varnish roundup.

If you are sealing an army, not a kit

This is where the product category splits by audience. Mr. Super Clear and Dullcote are scale-modeler products: small cans, one finished kit at a time. A wargamer with sixty infantry models is solving a different problem, and a 3 oz can is poor value for it.

The Army Painter’s matt varnish comes in a 400 ml can — roughly four times the volume — and is formulated for miniatures specifically, including killing the sheen left behind by dip-style shading. Per model sealed it is the best value on this page by a wide margin.

The honest trade: it can leave a faint sheen on metallics rather than the dead flat a lacquer gives, and the maker warns against spraying in humid or cold conditions, which it means. It is still a pressurized aerosol, so the shipping restriction applies to it too — but it is sold through the maker’s own US store, which makes it considerably easier to actually obtain.

If you cannot use an aerosol at all

A brush-on acrylic matte varnish is the answer, and it is better than its reputation.

The decisive advantage is that it cannot frost. Frosting is a lacquer-and-humidity interaction and a water-based varnish does not participate in it, so the failure mode that ruins finished models is simply off the table. There are no fumes, no booth is required, and it works at a desk in a flat in the middle of winter, which no aerosol does.

The costs are real. Brush marks and micro-bubbles show if you keep working the coat after it starts to set. Matte brush-on varnishes can go cloudy over dark colors if you apply them thickly, which is the water-based equivalent of frosting and is caused by too much varnish rather than too much humidity. And it is much slower than spraying across a whole army.

One technique note that makes it work: thin it slightly and build two light coats rather than one. Better still, if you own an airbrush, most water-based varnishes spray through it happily — which gets you aerosol-grade evenness with no frosting risk at all, and is the best-kept secret in this category.

The gentler option from the same maker

Worth knowing about if what you actually want is Mr. Hobby chemistry without the aggression. Mr. Premium Top Coat is the water-based aerosol in the same family, sold in gloss, semi-gloss and flat.

Being water-based makes it considerably less likely to attack a hand-brushed acrylic paint job, which is exactly the risk that makes people nervous about laying a lacquer over work they have spent a week on. It is a sensible first topcoat for that reason. It is also still an import, so the availability problem is only partly solved, and the flat version is not as flat as the lacquer.

If the model was painted with Tamiya cans

Then the simple answer is to stay in the Tamiya range and use TS-80 Flat Clear. Same 100 ml can format, same synthetic lacquer chemistry as the TS color sprays, which removes any question about whether the clear coat will react with the color underneath.

It is a good flat coat in its own right and widely stocked in the US. The reason it is not higher up this page is that it is a lacquer, so it frosts like the rest, and the 100 ml can is less convenient than a small can if you only need to seal one model occasionally.

What to check on the can before you buy

Switching topcoat brands is the one purchase in this hobby where the label genuinely misleads people, because four words are used loosely for three different finishes.

What the finish word actually means. “Flat” and “matt” usually mean the same thing and usually mean the flattest a brand offers. “Matte” on a general-purpose craft or hardware can often sits closer to what a hobby brand would call satin. And “dead flat” is a claim, not a standard — there is no measurement behind it. If you are replacing Mr. Super Clear specifically, you are replacing the flattest end of the scale, so anything labeled satin or semi-gloss is not the substitute even if the rest of the can looks right.

Lacquer or water-based. This decides the risk profile more than the brand does. A lacquer gives a harder shell and a flatter finish, and it can frost and can bite into a soft acrylic paint job. A water-based coat cannot frost and is far gentler, and it is less flat and less tough. Neither is the right answer in general; they are the right answers to different questions.

Can size against the job. A 3 oz can is a one-kit can. If you are sealing an army, the per-model arithmetic moves the decision on its own, which is the whole reason the 400 ml option is on this page.

Whether the brand sells a matching gloss. Most finished models want a gloss coat before decals and a flat coat after, and keeping both within one brand removes every compatibility question. Testors does this; so does Tamiya; so does Mr. Hobby. We cover the gloss half in the gloss varnish roundup.

Test the new can before you trust it

This is the part worth more than the brand choice, and it costs one spare model.

Every topcoat behaves slightly differently over a given paint. A can that is perfect over airbrushed lacquer can lift a thickly hand-brushed acrylic; a flat coat that looks right on a gray space marine can read chalky over a black cloak. Switching away from a product you know means you no longer know any of that, and the way to find out is not on the army.

Keep a test model: a spare, a failed experiment, a cheap plastic figure painted in the colors you actually use, including a black area, a white area and a metallic. Spray the new can on that first, in the conditions you normally work in. You are checking three things — whether it frosts in your room, whether it attacks your paint, and whether it is as flat as you wanted over your darkest color.

Then let it sit a week before you judge durability. A topcoat that feels dry in an hour can still be soft enough to take a fingerprint the next day, and the one property you cannot assess on day one is the one that matters on a model you handle every week. The full technique, including the humidity rule that causes most failures, is in how to seal miniatures.

What is not a substitute

Two things people try, both worth warning about.

Hardware-store matte clear. Krylon, Rust-Oleum and the rest are formulated for furniture and signage, sprayed from further away in much heavier coats. They can work, and they can also go on thick enough to drown panel lines and fine detail, and the matting agents are coarser. If you try one, test it on a spare model first — not on the army.

A gloss coat with the lid left off. There is no way to turn a gloss varnish matte. The matting agent is a physical additive; it is not something that develops with exposure. If you want flat, buy flat.

The verdict

Buy Testors Dullcote if you want the closest thing. Same chemistry, same can, in stock in US hobby shops, a hair less flat. For nearly everyone looking for a Mr. Super Clear substitute, this is the end of the search.

Buy the 400 ml miniatures varnish if you have an army to seal. Four times the can at a sane price, built for exactly this job. Accept a slight sheen on metallics.

Buy a brush-on acrylic matte varnish if aerosols are not an option. It cannot frost, it needs no ventilation, and through an airbrush it is genuinely excellent. This is the pick for anyone painting in a room they also sleep in.

Buy the water-based aerosol from the same family if you want a gentle first topcoat. Less risk of attacking brushed acrylics, still an import.

And if you can get Mr. Super Clear, get Mr. Super Clear. Nothing here beats it on finish. The only reasons to substitute are shipping, ventilation and risk tolerance — all three real, none of them a complaint about the product. The wider comparison of matte topcoats on quality alone is in the matte topcoat roundup, and how to seal miniatures covers the technique that decides whether any of them works.

The picks in full

#1 · Closest substitute overallTestors

Testors Dullcote

A long-standing lacquer flat coat, widely stocked in the US. Slightly less dead-flat than Mr. Super Clear and considerably easier to buy locally.

TypeLacquer aerosol
FinishFlat
Can size3 oz
HumidityFrosts in high humidity

What it gets right

  • Stocked in most US hobby shops, so no import wait
  • Tough flat coat that holds up to handling and gaming
  • Small cans suit occasional use without going off in the cupboard

Who it is wrong for

  • Not quite as flat as Mr. Super Clear; a faint sheen remains on dark colors
  • Frosts in humidity exactly like every other lacquer flat coat
  • The small can is poor value if you are sealing a whole army

Scored against this page’s criteria

Flatness8.5
US availability9.5
Forgiveness6.0
Value7.5
An aerosol can of flat lacquer coat
Our score8.5/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#2 · Best for sealing a whole armyThe Army Painter

The Army Painter Anti-Shine Matt Varnish (400 ml)

A 400 ml matt varnish aimed squarely at wargamers rather than scale modelers. Four times the can of a US hobby aerosol, which is the point when there are sixty models to seal.

Volume400 ml / 13.5 fl oz
Product codeCP3003
FinishMatt
Made forSealing over Quickshade and brushed acrylics
HumidityMaker warns against humid or cold conditions

What it gets right

  • A 400 ml can seals an army rather than a squad, which no 3 oz hobby can does
  • Formulated for miniatures specifically, including killing the shine left by a dip-style shade
  • Sold through the maker's own US store, so it is not an import-only product

Who it is wrong for

  • Can leave a faint sheen on metallics rather than the dead flat of a lacquer coat
  • The Army Painter warns against spraying in humid or cold weather, and it does frost if you ignore that
  • Pressurized aerosols are restricted shipping, so mail order means ground freight and a surcharge

Scored against this page’s criteria

Flatness7.5
US availability8.5
Forgiveness6.5
Value9.5

Specs from the manufacturer: The Army Painter product page

A large aerosol can of matt varnish for miniatures
Our score8.5/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#3 · Best if you cannot use an aerosolVarious (Vallejo, Liquitex)

Brush-on acrylic matte varnish

Water-based varnish you brush or airbrush on. Slower and less even than a rattle can, and it works in a flat in winter, which the rattle can does not.

BaseWater-based acrylic
ApplicationBrush or airbrush
FinishMatt, satin or gloss
Humidity riskNone — it cannot frost

What it gets right

  • Cannot frost, because frosting is a lacquer-and-humidity problem it does not share
  • Usable indoors with no fumes and no spray booth
  • Lets you gloss-coat one small area before an enamel wash without masking anything

Who it is wrong for

  • Brush marks and micro-bubbles show if you work it too long
  • Matt brush-on varnishes can go cloudy over dark colors if applied thickly
  • Much slower than spraying across a whole army

Scored against this page’s criteria

Flatness7.0
US availability10.0
Forgiveness9.5
Value9.0
A bottle of brush-on acrylic varnish
Our score8.2/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#4 · Same family, gentler chemistryGSI Creos / Mr. Hobby

Mr. Hobby Mr. Premium Top Coat (B-601 / B-602 / B-603)

The water-based aerosol in the same family, sold in gloss, semi-gloss and flat. Much less aggressive than Mr. Super Clear, which is exactly what a first topcoat over hand-brushed acrylics should be.

TypeWater-based aerosol
Can size88 ml
FinishesB-601 gloss, B-602 semi-gloss, B-603 flat
Safe overLacquer and water-based acrylic paint

What it gets right

  • Will not attack an acrylic paint job underneath, which is the single biggest hazard of a lacquer clear
  • Formulated to resist the whitening you get from overspraying — the usual beginner failure
  • Milder fumes than the lacquer cans, so a ventilated garage is enough rather than a booth

Who it is wrong for

  • The flat is not as dead-flat as Mr. Super Clear Matt; it keeps a faint sheen
  • 88 ml cans run out fast across a squad, so the per-model cost is higher
  • Still an aerosol — it is milder, not safe to spray in a closed room

Scored against this page’s criteria

Flatness7.5
US availability6.5
Forgiveness9.0
Value7.0

Specs from the manufacturer: GSI Creos / Mr. Hobby product page

An aerosol can of water-based clear topcoat
Our score8.6/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#5 · Best over a Tamiya-painted modelTamiya

Tamiya TS-80 Flat Clear

Tamiya's flat clear in the familiar 100 ml TS can. Chemically matched to the rest of the TS range, so it is the safe flat coat if the kit underneath was sprayed with Tamiya cans.

TypeLacquer aerosol
Can size100 ml
FinishFlat
Range matesTS-79 semi-gloss clear, TS-13 gloss clear

What it gets right

  • Same solvent family as the TS color cans, so no risk of one coat lifting another
  • The full gloss / semi-gloss / flat ladder exists in one range at one can size
  • Easier to find in US hobby shops than the imported Mr. Hobby cans

Who it is wrong for

  • Flattening agent settles hard — an unshaken can sprays glossy and ruins the pass
  • Hot enough to craze bare polystyrene if sprayed too close
  • Frosts in humidity like every other lacquer flat coat

Scored against this page’s criteria

Flatness8.0
US availability8.5
Forgiveness6.5
Value8.5

Specs from the manufacturer: Tamiya product page

An aerosol can of flat clear lacquer
Our score8.4/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#6 · The original, for referenceGSI Creos / Mr. Hobby

Mr. Hobby Mr. Super Clear Matt

The lacquer topcoat the hobby standardized on. Dead flat, tough, and the thing that turns shiny bare plastic into something that looks painted.

TypeLacquer aerosol
FinishMatt (also gloss and semi-gloss)
SealsPaint, decals, panel lining
HumidityFrosts above roughly 65% RH

What it gets right

  • A genuinely flat finish that kills the toy-like shine of bare injection plastic
  • Locks decals and panel lining under a hard layer that survives handling
  • The matte coat also hides the sheen difference between painted and bare areas

Who it is wrong for

  • Frosts white in humidity — the single most common way builders ruin a finished kit
  • Lacquer, so it can attack an unsealed acrylic paint job if laid on too wet
  • Needs ventilation and a respirator; this one is not a window-open job

Scored against this page’s criteria

Flatness10.0
US availability4.0
Forgiveness5.5
Value8.0
An aerosol can of matte clear topcoat
Our score9.1/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

FAQ

Questions people actually ask

What can I use instead of Mr. Super Clear?
Testors Dullcote is the closest and the easiest to buy in the US — the same lacquer chemistry in a 3 oz can, very slightly less dead flat. For sealing a whole army, The Army Painter's 400 ml matt varnish is far better value per model. If you cannot use an aerosol, a brush-on acrylic matte varnish cannot frost at all.
Why is Mr. Super Clear so hard to find?
It is a pressurized aerosol made in Japan. Aerosols cannot ship by standard post or air mail, so they travel as restricted goods by ground freight, often with a surcharge. That combination means many US retailers do not stock it and the ones that do sell out.
Is Testors Dullcote the same as Mr. Super Clear?
Not identical, but very close in kind: both are lacquer flat coats in small aerosols. Mr. Super Clear dries a shade flatter, and on dark colors Dullcote leaves a faint sheen. Both frost in humidity in exactly the same way, so switching brands does not remove that risk.
Is there a non-toxic alternative to Mr. Super Clear?
A brush-on water-based acrylic matte varnish is the low-fume route — no booth, no respirator, no frosting, usable indoors in winter. Mr. Premium Top Coat is a water-based aerosol in the same family as Mr. Super Clear and is much gentler over hand-brushed acrylics, though it is still an import.
Can I use Krylon or Rust-Oleum matte clear on miniatures?
You can, with care, and it is not what they are designed for. Furniture and signage clears are sprayed in heavier coats from further away, and laid on thick they can fill panel lines and soften fine detail. Test on a spare model before you commit an army to one.
Does The Army Painter matt varnish work as well?
For wargaming models, largely yes, and the 400 ml can makes it much better value per model. It is formulated for miniatures and kills the shine left by dip-style shading. It can leave a faint sheen on metallics compared with a lacquer, and the maker warns against spraying in humid or cold conditions.
Will a matte topcoat frost whichever brand I use?
Any lacquer flat coat can, because frosting comes from solvent flashing off into humid air rather than from the brand. Stay below roughly 65% relative humidity, avoid the cold, warm the can in your hands and use several light passes. Water-based brush-on varnish is the one option that cannot frost.

More in Model Kit Tools for Gunpla and Scale Models, or start from the beginning with what to buy first.

Sources

Read next