Skip to content
Sprue & Brush
Best gloss varnish

The Best Gloss Varnish for Miniatures

Gloss varnish is not a finish on this hobby's models — it is a tool. It does four specific jobs, and three of them end with a matte coat on top anyway.

By Brijon M.Last updated
A varnish coat being applied to a painted model

The short answer

For most miniature painters the right buy is a water-based brush-on gloss like Vallejo 70.510: it cannot frost, it needs no booth, and a dropper bottle lets you gloss one gemstone or a whole model. If you want a hard lacquer shell under decals or an oil wash, a gloss aerosol is the better tool, and it needs ventilation.

The quick version

#ProductBest forScorePrice
1
A dropper bottle of water-based gloss varnish
Vallejo Gloss Varnish (70.510)A water-based gloss in a 17 ml dropper. Brushes or airbrushes on, cannot frost because frosting is a lacquer problem, and it is the cheapest honest way to gloss a model indoors in winter.
Best gloss varnish overall8.5Check price on Amazon
2
An aerosol can of gloss lacquer clear coat
Testors Glosscote lacquer spray (3 oz)The gloss sibling of Dullcote, in the same 3 oz can, stocked in most US hobby shops. The pick when you want a lacquer gloss without waiting on an import.
Best gloss lacquer you can buy locally8.6Check price on Amazon
3
A pot of brush-on gloss varnish
Citadel Technical: 'ArdcoatCitadel's brush-on gloss, sold as a Technical paint rather than a varnish. Its real job is a wet-looking dot on a gemstone or a lens, not sealing a whole model.
Best for gems, lenses and eyes8.4Check price on Amazon
4
A Tamiya-style spray can of gloss clear lacquer
Tamiya TS-13 Clear (100 ml)Tamiya's gloss clear in the familiar 100 ml TS can, item 85013. Chemically matched to the rest of the TS range, which makes it the safe gloss if the model underneath was sprayed with Tamiya cans.
Best over a Tamiya-painted model8.7Check price on Amazon
5
An aerosol can of gloss clear topcoat
Mr. Hobby Mr. Super Clear UV Cut GlossA high-gloss lacquer clear with a UV-blocking additive. The coat you put down before decals and enamel panel lining, and the one that keeps white and red parts from yellowing on a sunlit shelf.
Best under decals, and for a sunlit shelf8.8Check price on Amazon
6
An aerosol can of matte clear topcoat
Mr. Hobby Mr. Super Clear MattThe lacquer topcoat the hobby standardized on. Dead flat, tough, and the thing that turns shiny bare plastic into something that looks painted.
The coat that goes on top afterwards9.1Check price on Amazon

Scores are our own editorial read against the criteria stated below — not a lab measurement and not a user rating. Tap a row for the full write-up.

What we judged these on

Almost nobody wants a glossy miniature. That sounds like a strange way to open a gloss varnish roundup, and it is the most useful thing on the page: on tabletop models and scale kits, gloss is almost always an intermediate layer, not the finish. So these are ranked on how well they do the jobs gloss is actually bought for:

  • Gloss level. How wet it reads when dry. Matters enormously on a gemstone and barely at all on a barrier coat that is about to be matted over.
  • Durability. Gloss coats are the hard layer in the sandwich. A lacquer shell survives a model being picked up every week; a thin water-based coat is softer.
  • Forgiveness. How badly it punishes humidity, a heavy hand or a coat applied too soon. This is where the lacquers lose points and the water-based varnishes win them.
  • Value. Cost per milliliter, weighed against how much you will actually use. A 24 ml pot you apply with a brush to gemstones lasts years; a can you spray across an army does not.

Scores are our own editorial read against those four criteria, not a lab measurement, and we have no test rig to claim otherwise. Volumes, item numbers and the makers’ own handling guidance come from manufacturer pages and live retailer listings, cited at the bottom. We do not print prices — a stale number is worse than none — so cost appears as brackets in the prose and the buy links go to live listings.

The four jobs gloss varnish actually does

Buy the right product by starting here, because the four jobs want genuinely different things and one of them is not a varnish job at all.

1. Gems, lenses, eyes and wet effects

The one case where gloss is the finish. A dot of gloss in the recess of a gemstone, over the lens of a helmet, or on a blade coated in something unpleasant reads as wet, and nothing else does that. This is a brush job on an area measured in millimeters, so a pot and a detail brush beat an aerosol by a mile.

2. A barrier under decals

Decals need a smooth, sealed surface. Over a matte or textured coat, the film traps air underneath and you get silvering — the dull metallic haze around the edge of a decal that no amount of pressing fixes. A gloss coat first gives the decal a glass-like surface to bond to, which is why the sequence on a kit is gloss, decal, decal solvent, then matte. Our decals and decal setter page works through that step by step.

3. A barrier under an enamel or oil wash

This is the job most people discover last and value most. An enamel panel wash or an oil wash is applied generously and then wiped back off with a solvent-dampened cotton bud, and that only works if the paint underneath is protected. A gloss coat does two things at once: it shields the acrylic from the solvent, and it gives the wash a slick surface so it flows into recesses and wipes cleanly off the raised areas. Over a matte coat, the same wash grabs and stains. The products for that step are in the panel liner roundup.

4. The hard layer in a protective sandwich

Gloss varnishes are generally tougher than matte ones, because the matting agent that scatters light also softens the film. So the durable finish on a gaming model is gloss first for strength, matte on top for looks. You get the toughness of the gloss coat and the appearance of the matte one.

Brush-on or aerosol

This decides your purchase more than brand does.

Brush-on, water-based. A dropper bottle of acrylic gloss. Slower, less perfectly even, and it cannot frost — because frosting is a lacquer-and-humidity problem that water-based varnish does not share. No fumes, no booth, works in a flat in January, and it lets you gloss one 2 mm gem without masking anything. For most miniature painters this is the correct first bottle, and it is the cheapest.

Aerosol lacquer. A harder, glassier, more even shell, laid down in seconds across a whole model. It is the better barrier under decals and under an oil wash, and it is the tougher half of the sandwich. It also demands ventilation, tolerates humidity badly and can attack a soft acrylic paint job if you lay it on wet. If you are spraying indoors regularly, read the spray booth roundup and the respirator roundup first — lacquer clear coats are the exact products a booth alone does not make safe.

Airbrush. Worth naming as the third option: most water-based gloss varnishes thin and spray happily through an airbrush, which gets you aerosol-grade evenness with none of the frosting risk and far more control. If you already own the airbrush, this is the best of both and costs nothing extra.

Frosting, and why it is not a gloss problem

Frosting — the white, chalky bloom that ruins a finished model — happens when a lacquer solvent flashes off fast enough to pull moisture out of humid air and trap it in the drying film. It is the single most common way people destroy finished work, and three things about it are worth knowing.

First, it is a lacquer problem. Water-based brush-on varnish does not frost, full stop. Second, matte coats show it far more dramatically than gloss coats, because the bloom and the matting agent compound. Third, and most usefully: a gloss coat that frosts can often be rescued by another light gloss coat in dry conditions, because the fresh solvent re-dissolves the top of the film and lets the moisture out. The same trick is much less reliable on matte.

The practical rules are the ones on the cans: do not spray above roughly 65% relative humidity, do not spray in the cold, warm the can in your hands first, and lay down several light passes rather than one wet one. The full method is in how to seal miniatures, and matte vs satin vs gloss for Gunpla has a longer section on frosting specifically.

The sandwich, in order

For a gaming model that will be handled, or any kit getting decals and a wash, the full sequence is:

  • Finish painting and let it cure properly. Vallejo advises waiting at least 24 hours after the paint before any varnish, and that is good advice for every product here.
  • Gloss coat. Thin and even. This is the structural layer and the decal and wash surface.
  • Decals, with setting solution, then let them dry hard.
  • Panel wash or oil wash, wiped back. The gloss underneath is what makes the wiping possible.
  • Matte coat to kill the shine, unless the model genuinely wants to look wet. This is where the matte topcoat roundup takes over.
  • Gloss the gems last, with a brush, after the matte coat. Do it before and the matte coat flattens them straight back down — which is the single most common ordering mistake in this whole sequence.

A note on metallics

Metallic paint and varnish have an awkward relationship. Any varnish dulls a metallic slightly, because metal paint works by having flakes aligned at the surface and a coat of clear over the top scatters that reflection. Matte varnish dulls it a lot; gloss dulls it least.

So on a model that is mostly armor plate, the honest options are: accept a flatter metal and matte everything, gloss coat the whole model and leave it glossy, or matte the model and go back over the metal areas with a brush-on gloss. The third is more work and looks best. If you have not bought metallics yet, the metallic paint roundup covers which ranges survive varnishing better than others.

Three ways a gloss coat goes wrong

Applied too soon. Varnish over paint that is dry to the touch but not cured traps solvent underneath, and the result is a soft, tacky finish that never quite hardens. Twenty-four hours is the number the makers give and it is not padding.

Applied too thick. A brush-on gloss worked for too long shows brush marks and micro-bubbles; a lacquer sprayed wet pools in recesses and softens the detail you spent the evening painting. Thin coats, several of them, is the answer for both.

Applied over the wrong paint. Lacquer over an unsealed, soft acrylic can bite into it. If the model was hand-brushed in acrylics and you want a lacquer shell, the safe route is a light water-based gloss first as a barrier, then the lacquer over the top. The chemistry behind that is in acrylic vs enamel vs lacquer.

What this costs

We do not publish prices, but the brackets are stable. A 17 ml dropper of water-based gloss is the cheapest thing on this page and will outlast several armies, because you use it in drops. The US hobby aerosols sit in the middle, and the 100 ml Japanese lacquer cans cost more per can but hold roughly three times what a 3 oz can does, so per milliliter they are competitive.

The Citadel Technical pot is the outlier: by milliliter it is dramatically the most expensive gloss here. It is also the one you apply in quantities measured in single drops to gemstones, so the cost per model is nearly nothing. Expensive per milliliter and cheap per use is a real distinction and this product is the clearest case of it on the site.

The verdict

Buy a water-based brush-on gloss first. It cannot frost, it needs no booth, it thins for an airbrush, and it does every job on this page acceptably well for less money than anything else. For a miniature painter without a spray setup it is not a compromise, it is the right answer.

Buy a gloss lacquer aerosol if you are doing decals or oil washes. The harder, glassier shell is genuinely better at both, and the US-stocked 3 oz cans mean no import wait. Pair it with the matching flat coat from the same brand so the chemistry is settled.

Buy the Citadel Technical pot if you paint gems and lenses. It is not a varnish purchase, it is a detail-paint purchase, and judged that way it is excellent.

Match the can to the paint underneath. If the model was sprayed with Tamiya cans, use the Tamiya clear; if it was Mr. Color, use the Mr. Hobby clear. Mixing lacquer families on one model is a risk with no upside.

And expect to buy a matte coat too. On three of the four jobs above, gloss is the middle of the sandwich rather than the end of it. If you only ever buy one clear coat, buy the matte one — the matte topcoat roundup is the page for that, and whether you need to seal at all is worth five minutes before you buy either.

The picks in full

#1 · Best gloss varnish overallVallejo

Vallejo Gloss Varnish (70.510)

A water-based gloss in a 17 ml dropper. Brushes or airbrushes on, cannot frost because frosting is a lacquer problem, and it is the cheapest honest way to gloss a model indoors in winter.

Volume17 ml dropper
BaseWater-based acrylic
ApplicationBrush or airbrush
Dry time before useMaker advises 24 h after the paint
Humidity riskNone — it cannot frost

What it gets right

  • Cannot frost, so it is the only gloss here that is safe to use on a humid day
  • Dropper bottle means you can thin it precisely for airbrushing or for a glaze
  • No fumes and no booth — usable at a desk in a flat in January

Who it is wrong for

  • Brush marks and micro-bubbles show if you keep working it after it starts to set
  • Vallejo advises waiting at least 24 hours after painting and spacing coats 5-10 minutes apart; rushing it is how it goes milky
  • Nowhere near as hard-wearing as a lacquer aerosol on a model that gets handled weekly

Scored against this page’s criteria

Gloss level7.5
Durability7.0
Forgiveness8.5
Value9.5

Specs from the manufacturer: Vallejo product page

A dropper bottle of water-based gloss varnish
Our score8.5/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#2 · Best gloss lacquer you can buy locallyTestors

Testors Glosscote lacquer spray (3 oz)

The gloss sibling of Dullcote, in the same 3 oz can, stocked in most US hobby shops. The pick when you want a lacquer gloss without waiting on an import.

TypeLacquer aerosol
Can size3 oz
FinishGloss
HumidityFrosts in high humidity, like every lacquer

What it gets right

  • Carried by most US hobby shops, so there is no import wait and no hazmat surcharge
  • Hard lacquer shell — the right coat under decals and under an enamel panel wash
  • Pairs with Dullcote, so the gloss-then-flat sequence is two cans from one brand

Who it is wrong for

  • Frosts white in humidity exactly like Mr. Super Clear does; the chemistry is the same
  • Lacquer over an unsealed acrylic paint job can bite if you lay it on wet
  • Part numbers are a trap: the 3 oz aerosol is 1261, while 1161 is a 1-3/4 oz bottle for brushing and airbrushing

Scored against this page’s criteria

Gloss level8.5
Durability9.0
Forgiveness6.0
Value7.5
An aerosol can of gloss lacquer clear coat
Our score8.6/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#3 · Best for gems, lenses and eyesCitadel

Citadel Technical: 'Ardcoat

Citadel's brush-on gloss, sold as a Technical paint rather than a varnish. Its real job is a wet-looking dot on a gemstone or a lens, not sealing a whole model.

Pot size24 ml pot
RangeCitadel Technical
BaseWater-based acrylic
ApplicationBrush
Typical useGemstones, lenses, eyes, wet effects

What it gets right

  • The most controllable gloss here — a brush puts it exactly on the 1 mm gem and nowhere else
  • Water-based, so it goes over a finished acrylic paint job with no risk of attacking it
  • Builds to a genuinely wet-looking shine in two or three thin coats

Who it is wrong for

  • Wrong tool for sealing a whole model; brushing it across flat armor shows every stroke
  • The most expensive gloss on this page per milliliter by a wide margin
  • Retailer listings disagree on how much paint is in the pot — some say 24 ml, some describe 12 ml in a 24 ml container

Scored against this page’s criteria

Gloss level9.0
Durability7.0
Forgiveness9.5
Value4.5

Specs from the manufacturer: Citadel product page

A pot of brush-on gloss varnish
Our score8.4/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#4 · Best over a Tamiya-painted modelTamiya

Tamiya TS-13 Clear (100 ml)

Tamiya's gloss clear in the familiar 100 ml TS can, item 85013. Chemically matched to the rest of the TS range, which makes it the safe gloss if the model underneath was sprayed with Tamiya cans.

TypeSynthetic lacquer aerosol
Volume100 ml
Item number85013
FinishGloss
CuresTamiya: cures in a short period

What it gets right

  • Same chemistry as the TS color cans, so there is no reaction risk on a TS-painted model
  • 100 ml is a usefully bigger can than the US 3 oz hobby aerosols
  • Tamiya states TS sprays are not affected by acrylic or enamel paint, so detail work can go on top afterwards

Who it is wrong for

  • Still a lacquer, so it frosts in humidity and can attack a soft acrylic coat underneath
  • Tamiya warns TS paint is not for clear polycarbonate bodies — that is what the PS range is for
  • Advice on the can is to let base paints cure fully first, which can mean waiting up to a week

Scored against this page’s criteria

Gloss level9.0
Durability9.0
Forgiveness6.5
Value8.5

Specs from the manufacturer: Tamiya product page

A Tamiya-style spray can of gloss clear lacquer
Our score8.7/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#5 · Best under decals, and for a sunlit shelfGSI Creos / Mr. Hobby

Mr. Hobby Mr. Super Clear UV Cut Gloss

A high-gloss lacquer clear with a UV-blocking additive. The coat you put down before decals and enamel panel lining, and the one that keeps white and red parts from yellowing on a sunlit shelf.

TypeLacquer aerosol
Can size170 ml
FinishGloss
ExtraUV-cut additive
Typical useGloss coat under decals and washes

What it gets right

  • A gloss layer is what stops decals silvering, because the film has nothing microscopic to trap air against
  • Enamel panel liner flows along a gloss surface instead of staining into it
  • The UV additive is the only meaningful protection for a display kit near a window

Who it is wrong for

  • Gloss is a working coat, not usually a final one — most kits need a matte or semi-gloss pass over it
  • Shows every fingerprint and dust mote while it cures
  • Costs the same as the Matt can for a finish you will mostly cover up

Scored against this page’s criteria

Gloss level9.5
Durability9.5
Forgiveness5.5
Value7.5

Specs from the manufacturer: GSI Creos / Mr. Hobby product page

An aerosol can of gloss clear topcoat
Our score8.8/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#6 · The coat that goes on top afterwardsGSI Creos / Mr. Hobby

Mr. Hobby Mr. Super Clear Matt

The lacquer topcoat the hobby standardized on. Dead flat, tough, and the thing that turns shiny bare plastic into something that looks painted.

TypeLacquer aerosol
FinishMatt (also gloss and semi-gloss)
SealsPaint, decals, panel lining
HumidityFrosts above roughly 65% RH

What it gets right

  • A genuinely flat finish that kills the toy-like shine of bare injection plastic
  • Locks decals and panel lining under a hard layer that survives handling
  • The matte coat also hides the sheen difference between painted and bare areas

Who it is wrong for

  • Frosts white in humidity — the single most common way builders ruin a finished kit
  • Lacquer, so it can attack an unsealed acrylic paint job if laid on too wet
  • Needs ventilation and a respirator; this one is not a window-open job

Scored against this page’s criteria

Gloss level1.0
Durability9.0
Forgiveness5.5
Value8.0
An aerosol can of matte clear topcoat
Our score9.1/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

FAQ

Questions people actually ask

What is the best gloss varnish for miniatures?
For most painters, a water-based brush-on gloss such as Vallejo 70.510: it cannot frost, needs no spray booth, thins for an airbrush and costs the least per milliliter. If you need a hard shell under decals or an enamel wash, a gloss lacquer aerosol is the better tool and needs proper ventilation.
Why would you put gloss varnish on a miniature?
Four reasons, and only one is about appearance. Gloss makes gems, lenses and wet effects read as wet; it gives decals a smooth surface so they do not silver; it protects the paint under an enamel or oil wash and lets the wash wipe off cleanly; and it is tougher than matte, so it is the hard layer under a matte topcoat.
Do you put gloss or matte varnish on first?
Gloss first, matte last. Gloss is the structural and functional layer — decal surface, wash barrier, durability — and matte goes over the top to kill the shine. The one exception is gemstones and lenses, which you gloss with a brush after the matte coat, or the matte coat flattens them again.
Does gloss varnish frost like matte varnish?
It can, because frosting is caused by lacquer solvent flashing off in humid air, not by the finish. Gloss shows it less dramatically than matte, and a frosted gloss coat can often be rescued with another light gloss coat in dry conditions. Water-based brush-on gloss cannot frost at all.
Can you use gloss varnish over metallic paint?
Yes, and it dulls the metal less than matte varnish does. Any clear coat scatters some of the reflection that makes metallic paint look metallic, so gloss is the lesser of two evils. Many painters matte the whole model then brush gloss back over the metal areas.
Is Citadel 'Ardcoat a varnish?
It is sold as a Technical paint rather than a varnish, and that reflects how it is best used: brushed onto gemstones, lenses and eyes in small amounts. It will seal a model, but brushing it across flat armor shows strokes, and per milliliter it is the most expensive gloss on this page.
How long should you wait before varnishing a model?
At least 24 hours after the last coat of paint — that is Vallejo's own guidance and it holds for the aerosols too. Varnish over paint that is touch-dry but not cured traps solvent underneath and gives you a finish that stays slightly tacky indefinitely.
Which gloss clear coat goes under decals?
Any of the lacquer aerosols here will do it; the usual picks are a hobby gloss lacquer or Mr. Super Clear UV Cut Gloss, which adds UV blocking for models on a sunlit shelf. The important part is that the surface is gloss and fully dry before the decal goes on, which is what prevents silvering.

More in Model Kit Tools for Gunpla and Scale Models, or start from the beginning with what to buy first.

Sources

Read next