The Best Paint Shakers and Mixers for Miniatures
Separated paint is the most common reason a bottle seems to have stopped covering. The fix is thirty seconds of real agitation, and what does it depends entirely on what your paint comes in.

The short answer
If your paint is in 17-18 ml dropper bottles, a mini vortex mixer is the buy: press, count to three, done. If your collection is Citadel pots, no vortex mixer will seal against them, and the right purchase is a bag of 5.5 mm stainless mixing balls plus thirty seconds of shaking.
The quick version
| # | Product | Best for | Score | Price |
|---|---|---|---|---|
| 1 | ![]() The Army Painter Mixing Balls (TL5041)A hundred 5.5 mm stainless steel balls. Two in a bottle and about thirty seconds of shaking does what no amount of shaking an empty-bottomed bottle will ever do, and no machine substitutes for them. | Buy these first | 9.0 | Check price on Amazon |
| 2 | ![]() Mini vortex mixer (touch-activated)A lab shaker the hobby adopted. Press a 17-18 ml dropper bottle into the rubber cup, the orbit does thirty seconds of wrist work in three, and separated paint comes back together properly. | Best shaker for dropper bottles | 8.6 | Check price on Amazon |
| 3 | ![]() Benchmark Scientific Vornado Mini Vortex Mixer (BV101)The actual lab instrument rather than a copy of one: fixed 2,800 rpm, a 4 mm orbit, a footprint smaller than a paint rack, and a two-year warranty on the motor. | Best-built vortex mixer | 8.4 | Check price on Amazon |
| 4 | ![]() Badger Air-Brush Co. 121 Paint MixerA battery stirrer with a four-inch shaft, made for the 1 to 4 oz jars airbrush paint comes in. It mixes inside the container, which is the one thing a vortex mixer cannot do. | Best for jars and large bottles | 7.6 | Check price on Amazon |
| 5 | ![]() Pro Acryl (22 ml)High-pigment acrylic in a 22 ml no-clog bottle with a glass agitator already inside. Covers in fewer coats than anything else here and dries properly matte. | The bottle that needs none of this | 9.1 | Check price on Amazon |
Scores are our own editorial read against the criteria stated below — not a lab measurement and not a user rating. Tap a row for the full write-up.
What we judged these on
This is a category where the right answer depends almost entirely on one thing nobody asks about first: the shape of the container your paint is in. So every pick is scored on four axes, and two of them are container questions.
- Dropper bottles. The 17-18 ml dropper that Vallejo, Army Painter, Scale75, Pro Acryl and Green Stuff World all use. This is the format the machines were effectively designed around.
- Citadel pots. The wide-mouth 12 ml flip-top pot. A completely different problem, and the one the category handles worst.
- Hands-free. Whether you can set it going and do something else, or whether you are still standing there holding a bottle.
- Value. What you pay against how much shaking it actually removes from your week.
Scores are our own editorial read against those four criteria, not a test-bench measurement. Specifications come from the makers’ own listings and from live retailer pages, cited at the bottom. Where retailer spec sheets contradicted each other — and on the battery stirrer they do — we say so in the entry rather than picking the number we liked.
Why separated paint matters more than it sounds
Miniature paint is pigment suspended in an acrylic binder, and pigment is heavier than binder. Leave a bottle upright for a month and gravity does its work: the top of the bottle becomes binder with a little color in it and the bottom becomes a dense sludge.
What that looks like at the desk is a bottle that has apparently stopped working. The first drop out of a separated dropper is thin, glossy and covers nothing, so people thin it further, get worse coverage, and conclude the paint has gone off. It has not. It is unmixed.
The categories where this bites hardest are the ones where the pigment is heaviest or the binder thinnest: metallics, where real metal flake sinks fast and visibly; washes, which are mostly carrier by volume; and contrast and speed paints, which are heavily pigmented and low in binder by design. A badly mixed metallic is the single most common reason someone thinks their silver is “patchy”.
Why shaking the bottle does not work
Here is the part that explains the whole page. Shaking a bottle of liquid does not mix it very well, because the liquid largely moves with the bottle. What mixes paint is something hard traveling through it, breaking up the settled layer on the way.
That is what an agitator ball is, and it is why some bottles ship with one in them. Monument Hobbies puts an agitator in every Pro Acryl bottle; Scale75 puts one in Instant Colors; Green Stuff World puts one in its inks. Citadel and Army Painter do not, which is why a bag of stainless mixing balls is the cheapest genuinely useful purchase in this part of the hobby.
So the stack is: a ball in the bottle does the mixing, and a machine — if you buy one — does the shaking for you. They are not alternatives. A vortex mixer on a ball-less bottle of settled metallic is agitating a column of liquid very quickly and achieving much less than you would think.
The vortex mixer, and its one hard limit
A mini vortex mixer is a small lab instrument: a motor spinning a rubber cup in a tight orbit, typically around 2,800 rpm on the fixed-speed units, activated by pressing something down into the cup. Press a dropper bottle in, count to three, lift it out. Three seconds of that genuinely does more than thirty seconds of wrist work.
It is also the best-value piece of hobby equipment most painters never buy, because the time it saves is spread across every bottle of every session rather than concentrated anywhere you notice.
And it does not work on Citadel pots. The rubber head is sized for lab tubes and dropper bottles. A Citadel pot’s mouth is far wider than the cup, so it cannot seat and cannot couple to the orbit — you end up holding a pot against a vibrating rubber disc. Every roundup of this category we have read quietly skips that, and it is the single most important fact for anyone whose collection is Citadel.
One safety note that is not optional: at 2,800 rpm, a dropper cap that is not fully closed becomes a paint sprayer. Check the cap, every bottle, every time. It is a habit you learn once, expensively.
If your paint is in Citadel pots
The honest answer is that there is no machine for you, and the good news is that you do not need one.
Drop two 5.5 mm stainless balls into the pot, close it, and shake for about thirty seconds — which is The Army Painter’s own instruction for their balls and works identically in a Citadel pot. That is it. A hundred balls cover an entire collection and the whole bag costs less than any machine on this page.
Two practical cautions. A ball goes into a flip-top pot easily and does not come back out easily, so treat it as permanent per pot. And a ball rattling around in a nearly empty pot will flick paint up into the lid and out of the seal, so either keep the pot reasonably full or accept a messy rim. If your pots are drying out faster than you can use them, reviving dried-out paint is the page for that, and paint storage and racks covers keeping bottles upright and findable in the first place.
If your paint is in jars or large bottles
Airbrush primer in 60 ml bottles, Createx-style 1 to 4 oz jars and large bottles of varnish are a third problem again. They are too big for a vortex cup and too deep for shaking to lift the settled pigment off the bottom.
A battery stirrer is the tool for that: a shaft with a small propeller that goes into the container and mixes from the inside, which is the one thing a vortex mixer structurally cannot do. The trade-off is that you clean the shaft between colors, and in a 12 ml pot the shaft is longer than the pot is deep, so it flicks more paint out than it mixes in. Use it for what it was built for.
If you are mixing airbrush paint specifically, the consistency you are aiming for and the additives that get you there are covered in airbrush thinners and additives, and how to thin paint for an airbrush has the method.
The free options, honestly assessed
Hardware-store ball bearings. Tempting and risky. Non-stainless bearings can rust in a water-based paint and discolor it, and chrome-plated ones can shed plating. If you go this route, stainless only, and expect to lose a bottle learning that.
An electric toothbrush taped to a bottle. It works, for about as long as the tape holds. Genuinely fine as a proof of concept if you want to know whether mechanical agitation would change your life before spending anything.
A cordless drill with a bent paperclip. Do not. The failure mode is paint across the room at drill speed, and the drill is not controllable at the speeds that would actually help.
Rolling the bottle between your palms. Better than shaking for a bottle with an agitator in it, worse than useless for one without. Costs nothing, so try it first.
What a shaker will not fix
Agitation solves exactly one problem, and three other problems look identical from the outside. Knowing which one you have saves both the money and the bottle.
Paint that has thickened in the bottle. If the binder has started to cure rather than merely settle, mixing redistributes lumps instead of dissolving them. The tell is texture: separated paint is thin on top and dense at the bottom but smooth throughout, while curing paint has rubbery specks in it that come through on the brush and will not break down however long you shake. A machine makes that worse, not better, by shearing the lumps into smaller lumps.
Paint that has gone off. A sour or ammoniacal smell is the binder failing, and no amount of agitation reverses it. That bottle is finished, and the honest move is to throw it away rather than fight it across a model you then have to strip.
Paint that is simply too thick for the job. Mixing has no effect on consistency, only on uniformity. If the paint is uniform and still claggy on the brush, the answer is thinning, not shaking, and the two get confused constantly — how to thin miniature paint is the page for that half of the problem.
The distinction that matters at the desk: shake first, then judge. A properly mixed bottle tells you honestly whether it needs thinning. An unmixed one lies to you in both directions, because the top of the bottle is thin and the bottom is thick, and you will thin the wrong one.
The purchase that removes the problem
Worth naming because it is the actual answer for people starting now: some ranges ship an agitator in every bottle. Pro Acryl does, Scale75 Instant Colors does, Green Stuff World inks do. A collection built on those ranges needs a shake and nothing else, and a dropper bottle with a ball in it mixes properly in seconds by hand.
That is not a reason to replace a collection you already own. It is a reason to weight “does it come with an agitator” higher than you would expect when you are choosing the next range — which is one of the things miniature paint brands compared scores the ranges on.
The verdict
Buy the mixing balls first, whatever else you do. A hundred stainless balls is the cheapest item on this page and it is the one that actually mixes paint. Machines shake; the ball does the work. Two per bottle.
Buy a mini vortex mixer if your paint is in droppers. Three seconds instead of thirty, every bottle, every session. The unbranded units work; they are just noisier and lighter, and a light one walks across the desk.
Buy the lab-grade vortex mixer if you want to buy it once. A specified motor, a published orbit and a two-year warranty, in a smaller footprint than most clones. You are paying several times as much for the same three seconds, bought with confidence.
Buy the battery stirrer only if you own jars. It is the right tool for 60 ml primer bottles and airbrush paint jars and the wrong tool for a 12 ml pot. If all your paint is in pots and droppers, skip it.
Do not buy a machine for a Citadel collection. Nothing in this category couples to a wide-mouth pot. Balls and thirty seconds is not a compromise here, it is the answer.
While you are setting the bench up properly, the painting station setup covers where all of this goes, and the wet palette roundup covers the other piece of kit that changes how paint behaves on the desk rather than in the bottle.
The picks in full
The Army Painter Mixing Balls (TL5041)
A hundred 5.5 mm stainless steel balls. Two in a bottle and about thirty seconds of shaking does what no amount of shaking an empty-bottomed bottle will ever do, and no machine substitutes for them.
What it gets right
- The single highest-value purchase on this page: a hundred balls cover an entire paint collection
- Stainless and rustproof, so they do not discolor paint the way cheap bearings can
- Works alongside a shaker rather than instead of one — the machine agitates, the ball does the breaking up
Who it is wrong for
- You still have to shake the bottle; this removes the futility, not the thirty seconds
- Getting a ball into a Citadel pot is easy and getting it back out is not, so it is a one-way decision per pot
- A ball rattling in a nearly empty bottle will throw paint at the cap — top the bottle up or accept the mess
Scored against this page’s criteria
Specs from the manufacturer: The Army Painter product page

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded
Mini vortex mixer (touch-activated)
A lab shaker the hobby adopted. Press a 17-18 ml dropper bottle into the rubber cup, the orbit does thirty seconds of wrist work in three, and separated paint comes back together properly.
What it gets right
- Turns the most tedious thirty seconds of a painting session into three, every single bottle
- Touch-activated: press down to run, lift off to stop, so there is nothing to switch and nothing to time
- Mixes separated metallics and washes far more completely than hand shaking does
Who it is wrong for
- The rubber head is sized for lab tubes and dropper bottles — a Citadel pot's mouth is too wide to seal against it
- Unbranded units vary wildly in motor quality and the cheap ones walk across the desk
- A badly closed dropper cap will spray paint across your bench at speed; check the cap first, every time
Scored against this page’s criteria

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded
Benchmark Scientific Vornado Mini Vortex Mixer (BV101)
The actual lab instrument rather than a copy of one: fixed 2,800 rpm, a 4 mm orbit, a footprint smaller than a paint rack, and a two-year warranty on the motor.
What it gets right
- A real laboratory motor, specified and warranted, rather than an unbranded unit with a guessed rating
- Small and heavy for its size, so it stays where you put it instead of creeping across the desk
- Fixed speed means there is no dial to get wrong — press, count to three, lift
Who it is wrong for
- Costs several times an unbranded vortex mixer for the same thirty seconds of saved shaking
- Same hard limit as every vortex mixer: a Citadel pot will not seal against the cup
- Fixed 2,800 rpm with no slow setting, which is fast for a nearly full dropper bottle
Scored against this page’s criteria
Specs from the manufacturer: Benchmark Scientific product page

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded
Badger Air-Brush Co. 121 Paint Mixer
A battery stirrer with a four-inch shaft, made for the 1 to 4 oz jars airbrush paint comes in. It mixes inside the container, which is the one thing a vortex mixer cannot do.
What it gets right
- Reaches the settled pigment at the bottom of a tall jar, which shaking a jar never fully lifts
- The honest answer for 60 ml airbrush primer and Createx-style jars that no vortex cup will hold
- Battery powered, so it lives in a drawer and needs no bench space
Who it is wrong for
- Clumsy in a 12 ml Citadel pot — the shaft is longer than the pot is deep and it flicks paint out
- You have to clean the shaft after every color or you are mixing the last one into the next
- Retailer listings disagree on its weight and water resistance; treat the spec sheets as approximate
Scored against this page’s criteria
Specs from the manufacturer: Badger product page

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded
Pro Acryl (22 ml)
High-pigment acrylic in a 22 ml no-clog bottle with a glass agitator already inside. Covers in fewer coats than anything else here and dries properly matte.
What it gets right
- Pigment density is the highest here — yellow and red cover in two coats instead of four
- 22 ml per bottle against Citadel's 12 ml, at a similar shelf price
- The no-clog cap genuinely does not weld shut, which is the Citadel pot's defining failure
Who it is wrong for
- The range is built around a painter's palette, not a game's official color names, so tutorials need translating
- Shelf availability is thinner than Citadel, Vallejo or Army Painter in most countries
- No contrast-style one-coat line of its own, so a speed-painting workflow needs a second brand
Scored against this page’s criteria
Specs from the manufacturer: Monument Hobbies product page

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded
FAQ
Questions people actually ask
What is the best paint shaker for miniatures?
Does a vortex mixer work with Citadel paint pots?
Do I need a paint shaker for miniature paints?
Are mixing balls safe in miniature paint?
How long should you shake miniature paint?
Why does my metallic paint look patchy?
Can you use an electric toothbrush as a paint shaker?
More in Workspace, Lighting and Storage, or start from the beginning with what to buy first.
Sources
- The Army Painter — Mixing Balls (TL5041): 5.5 mm stainless steel, two per bottle, about 30 seconds of shakingchecked November 2026
- Benchmark Scientific — Vornado mini vortex mixer: 2,800 rpm fixed, 4 mm orbit, 3.7 x 3.9 x 2.6 in, 2-year warrantychecked November 2026
- Badger Air-Brush Co. — model 121 paint mixer, 4 in shaft, 2 x AA batteries (not included), for 3/4 to 4 oz jarschecked November 2026
- Monument Hobbies — Pro Acryl bottle and in-bottle agitator specificationchecked November 2026