Skip to content
Sprue & Brush
Best spray paint for kits

The Best Spray Paint for Gunpla

A rattle can is the cheapest way to get an airbrush finish on a kit. The catch is that two of the cans on the shelf are not for your plastic.

By Brijon M.Last updated
Spray cans of model paint beside a plastic model kit

The short answer

Tamiya's TS range is the practical default: a 100 ml synthetic lacquer in more colors than anyone else and stocked in every US hobby shop. If you are repainting part of a Gundam kit and need the rest of it to match, Mr. Hobby's Gundam Color sprays are mixed to the actual scheme colors, which no generic range can do.

The quick version

#ProductBest forScorePrice
1
A spray can of synthetic lacquer model paint
Tamiya Color Spray, TS range (100 ml)The default rattle can for plastic kits: a synthetic lacquer in 100 ml, in more colors than anyone else, stocked in every US hobby shop. Not scheme-matched to Gundam, and the easiest range to source by a wide margin.
Best spray paint overall8.9Check price on Amazon
2
An aerosol can of model spray paint
Mr. Hobby Gundam Color Spray (SG range, 100 ml)A lacquer spray range mixed to the colors actual Gundam kits are molded in. The only spray paint here where "MS White" means the specific white on the box art rather than a white you have to match by eye.
Best color match for a Gundam scheme8.8Check price on Amazon
3
An aerosol can of lacquer model paint
Mr. Color Spray (GSI Creos, 100 ml)The aerosol version of the bottled Mr. Color lacquers, in the same 100 ml can. The point of it is that the can and the bottle are the same color, so a sprayed body and a hand-painted detail actually match.
Best if you also own bottled Mr. Color8.6Check price on Amazon
4
A spray can of fine surface primer for models
Tamiya Fine Surface Primer L (180 ml)The primer the rest of this page assumes. A fine lacquer primer in a 180 ml can, in light gray (87064) and white (87044), and the difference between a color that covers and a color that goes blotchy.
The can to buy before any of them8.8Check price on Amazon
5
An aerosol can of semi-gloss clear topcoat
Mr. Hobby Mr. Super Clear Semi GlossThe middle setting of the Mr. Super Clear range, and the one most finished kits actually want. It kills the raw plastic shine without flattening the panel detail the way a dead-matte coat does.
The can to buy after all of them9.0Check price on Amazon

Scores are our own editorial read against the criteria stated below — not a lab measurement and not a user rating. Tap a row for the full write-up.

What we judged these on

Spray cans for plastic kits all look interchangeable on a shelf and are not. These are ranked on the four things that actually decide whether a can was the right purchase:

  • Color match. Whether the can gives you the color you needed, and whether the parts you did not spray still match the ones you did. This is the whole reason a Gundam-specific range exists.
  • Finish quality. How smooth and even the coat lays down, and how hard it dries. A rattle can that behaves well gets you most of the way to an airbrush finish for a fraction of the outlay.
  • Plastic safety. Whether it attacks the styrene or the paint underneath. Lacquer is aggressive by design — that is why it bonds — and the failure modes are crazing and lifted paint.
  • Availability. Whether you can buy it in the US without a surcharge. Aerosols cannot travel by air mail, so this matters more in this category than almost any other.

Scores are our own editorial read against those four criteria, not a lab measurement. Volumes, item numbers and the makers’ own compatibility rules come from manufacturer pages and live retailer listings, cited at the bottom. We do not print prices — a stale number is worse than none — so cost appears as brackets in the prose.

Why a rattle can at all

The honest case for spray cans is that they sit in a genuinely useful gap. Hand-brushing a Gundam kit’s large flat armor panels is hard — brush marks show on exactly those surfaces — and an airbrush plus compressor is a real investment before you know whether you enjoy painting kits at all.

A can bridges that. You get an even, sprayed coat on big panels, in lacquer that bonds to bare plastic properly, for the price of a couple of bottles of paint. The limits are that you cannot thin it, cannot mix a custom color, cannot do fine control, and go through paint much faster than an airbrush would.

Which means a can is the right tool for whole-part color and the wrong one for detail. Most painted kits end up using both: cans for the armor, a brush or markers for the frame and the small parts. Our main Gunpla paint page covers the brush and marker side, and whether you need an airbrush is the page to read before upgrading.

The three lacquer families, and why it matters

Nearly every spray can sold for plastic kits is a lacquer, and they come from three families that are safe within themselves and not always safe across each other.

Tamiya TS

Synthetic lacquer in 100 ml cans, the widest color range in the category, and the easiest to find in the US by a wide margin. TS-13 gloss clear and TS-80 flat clear are in the same range, so the clear coat is chemistry-matched to the color. Tamiya states TS sprays are not affected by acrylic or enamel paint once cured, so detail work goes on top safely.

Mr. Color (GSI Creos)

The aerosol version of the bottled Mr. Color lacquers, also 100 ml. The specific advantage is that the can and the bottle are the same color, so you can spray a panel and then airbrush or brush a touch-up in the matching bottled paint and not see the join. Mr. Color is also the range most Japanese build guides quote, so published recipes translate directly.

The rule that catches people: Mr. Color Spray must not go over Aqueous Hobby Color or Acrysion, Mr. Hobby’s own water-based ranges. The lacquer solvent lifts both. Going the other way is fine, and Mr. Hobby Topcoat and Mr. Super Clear both go over Mr. Color Spray without a problem.

Gundam Color (Mr. Hobby)

The same lacquer chemistry as Mr. Color, mixed to the colors Gundam kits are actually molded and boxed in, under SG codes. One listing gives coverage of roughly 0.9 square meters for two coats, with one to two coats recommended.

This solves a problem no generic range can. If you are repainting one arm, or spraying the white armor and leaving the molded-color inner frame alone, “MS White” is the white on that kit rather than a white you have to match by eye against a part you cannot take to the shop.

The can that ruins a styrene kit

This deserves its own section because the packaging is nearly identical and the mistake is expensive.

Tamiya sells three spray families side by side: TS for plastic models, AS for aircraft colors, and PS for polycarbonate — the flexible clear shells used on radio-control car bodies. PS paint is formulated to flex with polycarbonate and to be sprayed on the inside of a clear shell. It is the wrong paint for a Gunpla kit, and Tamiya says the reverse too: TS paint is not designed for clear polycarbonate bodies.

The cans sit in the same rack, in the same shape, with two-letter codes that differ by one character. Check the letters before the number, every time. If you are buying a Gunpla or scale kit color, you want TS.

Primer is not optional here

A lacquer color sprayed straight onto bare, shiny, molded-color styrene will mostly stick, and it will also go on blotchy over a dark part, let the molded color influence the shade, and show every fingerprint and every nub mark you did not sand.

A fine primer fixes all of that. Tamiya’s Fine Surface Primer L comes in a 180 ml can — substantially more than the hobby norm, which matters across a full kit — in light gray (item 87064) and white (87044). Tamiya’s own guidance is the useful part: gray under dark colors, white under light ones. Spray a bright red over gray primer and it reads muddy; over white it reads red.

Two cautions. Lacquer primer will craze a thin, stressed styrene part if you spray it wet, so light passes. And prime after you have finished cleaning up the parts, not before — see how to remove nub marks, because primer makes every one you missed obvious. If you are priming indoors, how to prime indoors covers doing it without coating the room.

Getting a good coat out of a can

Spray cans have a worse reputation than they deserve, almost entirely because of how people use them. Five things change the result:

  • Warm the can. Hold it in your hands or stand it in warm (not hot) water for a few minutes. Cold propellant sprays coarse, spatters and dries rough.
  • Shake it properly. A full minute, not three tokens shakes. Pigment settles hard in a can and the first pass out of an unmixed can is thin and glossy.
  • Light passes, moving before you press. Start the spray off the model, sweep across, release off the other side. Three light coats beat one wet one every time, and a wet coat is what pools in panel lines and drowns the detail.
  • Mind the humidity. Lacquer in damp air can bloom, exactly as a clear coat does. The same rules apply as for topcoats.
  • Spray the parts on sticks, not on the sprue. Mount cut and cleaned parts on toothpicks or clips so you can reach every face. Spraying a full runner paints the sprue and leaves bare plastic on the mating faces.

Cans also need the same ventilation an airbrush does — more, in fact, because the volume of atomized lacquer is far higher. The spray booth roundup and the respirator roundup both apply; a lacquer rattle can is the clearest case on the site of a product where the booth alone is not enough.

The order for a sprayed kit

Spray paint is one step in a sequence and the sequence is what decides the result:

  • Build, then take it apart into sub-assemblies. Clean up nub marks and seams first — sanding sticks and files are the tools for that.
  • Wash the parts to remove mold release and finger oils, and let them dry fully.
  • Primer, light coats, gray or white depending on what is going over it.
  • Color, several light coats, one part at a time.
  • Gloss clear if decals or a panel wash are coming — covered in the gloss varnish roundup.
  • Decals, then panel lining.
  • Topcoat to unify the finish. Semi-gloss is the default on Gunpla, which matte vs satin vs gloss explains, and Mr. Super Clear alternatives covers what to use when the usual can is out of stock.

What about hardware-store spray paint?

It is cheaper per can by a wide margin, so the question is fair. The answer is that it is formulated for a different job: furniture and metalwork, sprayed from further away in much heavier coats, with coarser pigment and a thicker film.

On a model, that shows up as filled panel lines, softened edges and lost surface detail — and some of them attack bare styrene more aggressively than hobby lacquer does, because nobody formulating them was worried about a 1 mm thick part. On terrain and bases, where there is no fine detail to lose and volume matters, it is genuinely the better buy; craft paint vs miniature paint makes the same split for brush paint.

If you want to try one, test it on a spare runner from the same kit first. Not on the finished model.

What this costs

We do not publish prices, but the brackets are clear enough. The Japanese 100 ml cans and the Tamiya 100 ml cans sit in broadly the same bracket, with Tamiya usually cheaper in the US purely because it is distributed better. The Gundam Color range runs a little higher as an import. The 180 ml primer can costs more than a color can and covers proportionally more.

The real cost nobody plans for is how many cans a kit takes. A can does not go as far as it looks like it should once you are spraying both sides of thirty armor parts, and running out of a color mid-kit means a reorder and a possible batch difference. For a full repaint of a master grade, budget two cans of the main color rather than one. That arithmetic, and where spray cans sit against an airbrush, is in what it costs to start.

The verdict

Buy Tamiya TS for most jobs. The widest color range, the best US availability, a well-behaved synthetic lacquer, and matched gloss and flat clears in the same range. If you are buying one spray system and never thinking about it again, this is it.

Buy Gundam Color if the rest of the kit has to match. Repainting one section, or spraying the armor and leaving the molded frame, is exactly the case where a scheme-matched can earns its import premium.

Buy Mr. Color Spray if you already own bottled Mr. Color. Same color in can and bottle means invisible touch-ups, and the published recipes line up. Just never spray it over Aqueous or Acrysion.

Buy the primer at the same time as the color. It is not an optional extra in this category; it is the difference between a color that covers evenly and one that reads blotchy over molded plastic. Gray under dark, white under light.

And check the two letters on the can. TS for plastic kits, PS for polycarbonate RC bodies. They sit in the same rack and one of them is not for your model.

The picks in full

#1 · Best spray paint overallTamiya

Tamiya Color Spray, TS range (100 ml)

The default rattle can for plastic kits: a synthetic lacquer in 100 ml, in more colors than anyone else, stocked in every US hobby shop. Not scheme-matched to Gundam, and the easiest range to source by a wide margin.

TypeSynthetic lacquer aerosol
Volume100 ml
RangeTS (for plastic)
Also sold asAS for aircraft, PS for polycarbonate
CuresTamiya: in a short period

What it gets right

  • Far and away the easiest of these ranges to buy in the US, in the most colors
  • Dries fast and hard, so masking for a second color is a same-session job
  • TS-80 flat and TS-13 gloss are in the same range, so the clear coat is chemistry-matched

Who it is wrong for

  • Colors are generic rather than Gundam-matched, so blending into unpainted parts is on you
  • The PS range looks identical on the shelf and is for polycarbonate RC bodies — the wrong can for a styrene kit
  • Lacquer, so it needs ventilation and it will craze bare styrene if you flood a thin part

Scored against this page’s criteria

Color match6.5
Finish quality9.0
Plastic safety7.0
Availability10.0

Specs from the manufacturer: Tamiya product page

A spray can of synthetic lacquer model paint
Our score8.9/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#2 · Best color match for a Gundam schemeGSI Creos / Mr. Hobby

Mr. Hobby Gundam Color Spray (SG range, 100 ml)

A lacquer spray range mixed to the colors actual Gundam kits are molded in. The only spray paint here where "MS White" means the specific white on the box art rather than a white you have to match by eye.

TypeLacquer aerosol
Volume100 ml
RangeGundam Color (SG codes)
CoverageAbout 0.9 sq m for two coats (maker's figure)
CoatsOne to two recommended

What it gets right

  • Colors are mixed to Gundam scheme references, so a repaint matches the parts you did not spray
  • Lacquer bites into bare styrene properly and dries hard enough to mask over the same day
  • Mr. Hobby Topcoat and Mr. Super Clear go over it without a reaction, so the finish sequence is settled

Who it is wrong for

  • The range is scheme-specific, so a color you want may simply not exist as a can
  • Cannot go over Aqueous Hobby Color or Acrysion — the lacquer lifts those water-based paints
  • Imported from Japan, so US stock is thinner and pricier than Tamiya's equivalent

Scored against this page’s criteria

Color match10.0
Finish quality9.0
Plastic safety7.0
Availability6.0
An aerosol can of model spray paint
Our score8.8/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#3 · Best if you also own bottled Mr. ColorGSI Creos / Mr. Hobby

Mr. Color Spray (GSI Creos, 100 ml)

The aerosol version of the bottled Mr. Color lacquers, in the same 100 ml can. The point of it is that the can and the bottle are the same color, so a sprayed body and a hand-painted detail actually match.

TypeLacquer aerosol
Volume100 ml
RangeMr. Color
CoatsOne to two recommended
TopcoatMr. Hobby Topcoat and Super Clear go over it

What it gets right

  • Same color as the bottled Mr. Color, so airbrush touch-ups after spraying are invisible
  • Mr. Color is the reference range most Japanese build guides quote, so recipes translate directly
  • Hard lacquer finish that takes panel lining and decals without a separate barrier coat

Who it is wrong for

  • Must NOT go over Aqueous Hobby Color or Acrysion — the solvent lifts both
  • Thinner US distribution than Tamiya, and aerosol shipping restrictions make mail order awkward
  • Strong solvent smell; this is a booth-and-respirator paint, not an open-window one

Scored against this page’s criteria

Color match8.5
Finish quality9.5
Plastic safety6.5
Availability6.0
An aerosol can of lacquer model paint
Our score8.6/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#4 · The can to buy before any of themTamiya

Tamiya Fine Surface Primer L (180 ml)

The primer the rest of this page assumes. A fine lacquer primer in a 180 ml can, in light gray (87064) and white (87044), and the difference between a color that covers and a color that goes blotchy.

TypeLacquer primer aerosol
Volume180 ml
Light grayItem 87064
WhiteItem 87044
ForPlastic and metal

What it gets right

  • A 180 ml can is substantially more primer than the hobby norm, which matters on a full kit
  • Fine enough that it does not soften panel lines the way a hardware-store primer does
  • Gray under dark colors and white under light ones, which Tamiya states outright

Who it is wrong for

  • Item numbers are easy to confuse — 87064 is light gray and 87044 is white, and a third gray code also circulates
  • Lacquer primer will craze a thin, stressed styrene part if you spray it wet
  • Overkill if you are only spraying a topcoat over the molded colors

Scored against this page’s criteria

Color match7.0
Finish quality9.5
Plastic safety7.0
Availability9.0

Specs from the manufacturer: Tamiya product page

A spray can of fine surface primer for models
Our score8.8/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

#5 · The can to buy after all of themGSI Creos / Mr. Hobby

Mr. Hobby Mr. Super Clear Semi Gloss

The middle setting of the Mr. Super Clear range, and the one most finished kits actually want. It kills the raw plastic shine without flattening the panel detail the way a dead-matte coat does.

TypeLacquer aerosol
Can size170 ml
FinishSemi-gloss
SealsPaint, decals, panel lining
HumidityFrosts in high humidity, like all lacquer clears

What it gets right

  • Reads as a scale finish rather than a toy finish — the sheen is close to real painted machinery
  • More forgiving than flat over dark colors, where a matte coat can go chalky
  • Hides the sheen mismatch between painted parts and bare runner plastic

Who it is wrong for

  • Not the right choice if you want a chalky, non-reflective Warhammer look — buy the Matt can for that
  • Lacquer, so it can lift an unsealed acrylic paint job if you lay it on wet
  • Frosts above roughly 65% relative humidity, exactly like the Matt version

Scored against this page’s criteria

Color match5.0
Finish quality9.5
Plastic safety7.0
Availability6.0

Specs from the manufacturer: GSI Creos / Mr. Hobby product page

An aerosol can of semi-gloss clear topcoat
Our score9.0/10
Check price on Amazon

We do not publish prices. Amazon shows the current one, which is the only one that is ever right. #ad · how this is funded

FAQ

Questions people actually ask

What is the best spray paint for Gunpla?
Tamiya's TS range for most jobs: a 100 ml synthetic lacquer in the widest color selection, stocked in nearly every US hobby shop, with matched gloss and flat clears. If the parts you do not spray have to match the ones you do, Mr. Hobby's Gundam Color sprays are mixed to the actual kit scheme colors.
Can you use regular spray paint on Gunpla?
You can, with real risk. Hardware-store clears and colors are formulated for furniture and metal, sprayed in heavier coats with coarser pigment, so they fill panel lines and soften detail, and some attack thin styrene more aggressively than hobby lacquer. Test on a spare runner before committing a kit.
Do you need primer before spray painting a model kit?
Effectively yes. Lacquer will stick to bare styrene, but the molded color shows through, coverage goes blotchy on dark parts, and every unsanded nub mark stays invisible until the color is on. Tamiya's guidance is gray primer under dark colors and white under light ones.
What is the difference between Tamiya TS and PS spray paint?
TS is for plastic models; PS is for polycarbonate, the flexible clear shells used on radio-control car bodies. The cans look nearly identical on the shelf. Tamiya states TS paint is not designed for clear polycarbonate bodies, and PS is the wrong paint for a styrene kit, so check the letters.
Can you spray Mr. Color over Aqueous Hobby Color?
No. Mr. Color Spray cannot be applied over Aqueous Hobby Color or Acrysion — the lacquer solvent lifts both water-based paints. The reverse is fine, and Mr. Hobby Topcoat and Mr. Super Clear both go over Mr. Color Spray without a reaction.
How many spray cans does a Gunpla kit need?
More than people expect. Spraying both faces of a full set of armor parts uses a can faster than it looks, and running out mid-kit risks a batch difference on the reorder. For a full repaint of a master grade, budget two cans of the main color rather than one.
Should you spray paint parts on the runner?
No. Spraying a full sprue paints the runner, leaves bare plastic on the mating faces you cut, and means every nub mark gets cleaned up after painting. Cut and clean the parts first, mount them on toothpicks or clips, and spray them individually.
Does spray paint need a topcoat?
For a finished look, yes. A topcoat unifies the sheen between sprayed, hand-painted and bare molded parts, and seals decals and panel lining. Semi-gloss is the usual default on Gunpla; matte reads more like scale armor and gloss suits a show finish.

More in Miniature Paints and Paint Sets, or start from the beginning with what to buy first.

Sources

Read next